To advertise with us contact on Whatsapp: +923041280395 For guest post email at: itsaareez1@gmail.com

Easy way to install Nginx server on CentOS

Easy way to install Nginx server on CentOS

Nginx is an open-source, light weight, high-performance HTTP / HTTPS and reverse proxy server responsible for handling the load of some of the largest websites on the Internet. It can be used as a standalone web server, load balancer, content cache, and reverse proxy for HTTP and non-HTTP servers.

Compared to Apache, Nginx can handle a much large number of concurrent connections and has a smaller memory footprint per connection. Hence, it is highly preferred for the systems with more traffic requests.

This tutorial explains how to install and manage Nginx on CentOS 8.

Prerequisites

Before continuing, make sure you are logged in as a user with sudo privileges, and you don’t have Apache or any other process running on port 80 or 44. Make sure these ports are also not blocked by firewalls.

Installing Nginx on CentOS 8

Starting with CentOS 8, the Nginx package is available in the default CentOS repositories. Hence there is no need to import any 3rd party repository. Simple execute the following command on your CentOS terminal.

sudo yum install nginx

On completion of successful installation, you would like to start Nginx server by executing command below.

sudo systemctl start nginx

On rebooting server, Nginx will not start automatically. To automatically start Nginx server on reboot or startup, execute the command below.

sudo systemctl enable nginx

To verify the status of Nginx, you can use the following command.

sudo systemctl status nginx

Output will look like as:

● nginx.service - The nginx HTTP and reverse proxy serverLoaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled)Active: active (running) since Saturday 2019-10-05 17:32:45 UTC; 5min ago...

Setting up Firewall

FirewallD is the default firewall solution on Centos 8. However, you may be using UFW.

During the installation, Nginx creates firewalld service files with predefined rules for allowing access to HTTP (80) and HTTPS (443) ports.

Use the following commands to open the necessary ports permanently:

sudo firewall-cmd --permanent --zone=public --add-service=http
sudo firewall-cmd --permanent --zone=public --add-service=https
sudo firewall-cmd --reload

Now, you can test your Nginx installation, by opening http://YOUR_IP in your web browser. You should see the default Nginx welcome page, which should look like the image below:

nginx server on centos

Nginx useful commands to remember

Start Nginx

With Systemd service:

sudo systemctl start nginx

Without Systemd service:

sudo service start nginx

To enable auto start of Nginx on rebooting:

sudo systemctl enable nginx

Stop Nginx

With Systemd service:

sudo systemctl stop nginx

Without Systemd service:

sudo service stop nginx

Restart Nginx

With Systemd service:

sudo systemctl restart nginx

Without Systemd service:

sudo service restart nginx

Reload Nginx

With Systemd service:

sudo systemctl reload nginx

Without Systemd service:

sudo service reload nginx

Nginx Test Configurations:

sudo nginx -t

View Nginx Status

sudo systemctl status nginx

Check Nginx Version

sudo nginx -v

Nginx Configuration Best Practices and File’s Structure

  • All Nginx configuration files are located in the /etc/nginx/ directory.
  • The main Nginx configuration file is /etc/nginx/nginx.conf.
  • Creating a separate configuration file for each domain makes the server easier to maintain.
  • The Nginx server block files must end with .conf and be stored in /etc/nginx/conf.d directory. You can have as many server blocks as you want.
  • It is a good practice to follow a standard naming convention. For example, if the domain name is mydomain.com then the configuration file should be named mydomain.com.conf
  • If you use repeatable configuration segments in your domain server blocks, it is a good idea to refactor those segments into snippets.
  • Nginx log files (access.log and error.log) are located in the /var/log/nginx/ directory. It is recommended to have a different access and error log files for each server block.
  • You can set your domain document root directory to any location you want. The most common locations for webroot include:
    • /home/<user_name>/<site_name>
    • /var/www/<site_name>
    • /var/www/html/<site_name>
    • /opt/<site_name>
    • /usr/share/nginx/html

Conclusion

Congratulations, you have successfully installed Nginx on your CentOS 8 server. You’re now ready to start deploying your applications and use Nginx as a web or proxy server.

Leave a Reply

Your email address will not be published. Required fields are marked *